MATLAB实现五子棋游戏（双人对战、可悔棋）

本文实例为大家分享了MATLAB实现五子棋游戏的具体代码，供大家参考，具体内容如下

程序介绍：

1、此游戏只可用于双人对战。

2、棋盘颜色、棋盘格数、棋子颜色等参数均可自由设置

3、鼠标点击非棋盘区域可悔棋。

一、游戏界面

二、主程序及函数

1、主程序

%Author:LeiZhen
%Date:2018-03-12
%此程序只下五子棋，并判断胜负关系
clear all;
clc
%定义颜色
Color_QiPanBack=[135,206,255];
Color_ChessLine=[100,100,100];
%获胜连子数
Num_Victory=5;
Dpixel=33;
NumCell=14;%棋盘格的行或列数
Wid_edge=18;
[M_QiPan,xcol_ChessLine,yrow_ChessLine]=QiPan(NumCell,Dpixel,Wid_edge,Color_QiPanBack,Color_ChessLine);
imshow(M_QiPan);
set (gcf,'Position',[600,45,625,625]);
set (gca,'Position',[0,0,1,1]);
hold on,
%棋半径
radius_Chess=15;
M_LuoZi=zeros(NumCell+1,NumCell+1,2);
VictoryB=0;
VictoryW=0;
StateB=1;
StateW=2;
NumChess=0;
for i=1:(NumCell+1)^2
  [x_col_Chess, y_row_Chess]=ginput_pointer(1);
  %获得距离鼠标点击点最近的下棋点的坐标,并保证点击的下棋点在棋盘内
  if x_col_Chess<max(xcol_ChessLine)+Dpixel/2&&x_col_Chess>min(xcol_ChessLine)-Dpixel/2&&y_row_Chess<max(yrow_ChessLine)+Dpixel/2&&y_row_Chess>min(yrow_ChessLine)-Dpixel/2
    for x_i=xcol_ChessLine
      if abs(x_col_Chess-x_i)<Dpixel/2;
        x_col_Chess=x_i;
      end
    end
    for y_i=yrow_ChessLine
      if abs(y_row_Chess-y_i)<Dpixel/2;
        y_row_Chess=y_i;
      end
    end
  %点击悔棋区（棋盘外的区域）悔棋
  else
    [x_col_LuoZi_old,y_row_LuoZi_old]=find(M_LuoZi(:,:,2)==max(max(M_LuoZi(:,:,2))));
    x_col_Chess_old=(x_col_LuoZi_old-1)*Dpixel+Wid_edge+1;
    y_row_Chess_old=(y_row_LuoZi_old-1)*Dpixel+Wid_edge+1;
    if NumChess>=1
      M_QiPan=Chess(M_QiPan,x_col_Chess_old,y_row_Chess_old,radius_Chess,3,Wid_edge,Dpixel,Color_QiPanBack,Color_ChessLine);
      imshow(M_QiPan);
      NumChess=NumChess-1;
      M_LuoZi(x_col_LuoZi_old,y_row_LuoZi_old,1)=0;
      M_LuoZi(x_col_LuoZi_old,y_row_LuoZi_old,2)=0;
    end
    continue;
  end
  %落子并防止重复在同一个下棋点落子
  x_col_LuoZi=(x_col_Chess-Wid_edge-1)/Dpixel+1;
  y_row_LuoZi=(y_row_Chess-Wid_edge-1)/Dpixel+1;
  if M_LuoZi(x_col_LuoZi,y_row_LuoZi,1)==0
    NumChess=NumChess+1;
    M_LuoZi(x_col_LuoZi,y_row_LuoZi,2)=NumChess;
    if mod(NumChess,2)==1
      M_QiPan=Chess(M_QiPan,x_col_Chess,y_row_Chess,radius_Chess,1,Wid_edge,Dpixel,Color_QiPanBack,Color_ChessLine);
      imshow(M_QiPan);
      M_LuoZi(x_col_LuoZi,y_row_LuoZi,1)=StateB; %落子为黑棋
      VictoryB=Victory_Judge(M_LuoZi,x_col_LuoZi,y_row_LuoZi,StateB);
    elseif mod(NumChess,2)==0
      M_QiPan=Chess(M_QiPan,x_col_Chess,y_row_Chess,radius_Chess,2,Wid_edge,Dpixel,Color_QiPanBack,Color_ChessLine);
      imshow(M_QiPan);
      M_LuoZi(x_col_LuoZi,y_row_LuoZi,1)=StateW; %落子为白棋
      VictoryW=Victory_Judge(M_LuoZi,x_col_LuoZi,y_row_LuoZi,StateW);
    end
  end
  %显示获胜信息
  if VictoryB==1
    %普通对话框
    h=dialog('name','对局结束','position',[500 350 250 100]);
    uicontrol('parent',h,'style','text','string','黑棋获胜！','position',[35 35 200 50],'fontsize',30);
    uicontrol('parent',h,'style','pushbutton','position',[150 5 80 30],'fontsize',20,'string','确定','callback','delete(gcbf)');
    break;
  elseif VictoryW==1
    %普通对话框
    h=dialog('name','对局结束','position',[500 350 250 100]);
    uicontrol('parent',h,'style','text','string','白棋获胜！','position',[35 35 200 50],'fontsize',30);
    uicontrol('parent',h,'style','pushbutton','position',[150 5 80 30],'fontsize',20,'string','确定','callback','delete(gcbf)');
    break;
  end
end

2、画棋盘函数

%Author:LeiZhen
%Date:2018-03-12
function [M_QiPan, xcol_ChessLine,yrow_ChessLine]=QiPan(NumCell, Dpixel, Wid_edge,Color_QiPanBack,Color_ChessLine)
%此程序为画五子棋盘的程序
%NumCell为棋盘格数
%Dpixel为相邻棋盘线间的像素间隔
%Wid_edge为棋盘边缘的像素宽度
%Color_QiPanBack为棋盘背景颜色
%Color_ChessLine为棋盘线的颜色
%M_QiPan为棋盘矩阵
%xcol_ChessLine为棋盘列线
%yrow_ChessLine为棋盘行线
NumSum=1+Dpixel*NumCell+Wid_edge*2;
xcol_ChessLine=Wid_edge+1:Dpixel:NumSum-Wid_edge;%列
yrow_ChessLine=Wid_edge+1:Dpixel:NumSum-Wid_edge;%行
M_QiPan=uint8(ones(NumSum,NumSum,3));
M_QiPan(:,:,1)=M_QiPan(:,:,1)*Color_QiPanBack(1);
M_QiPan(:,:,2)=M_QiPan(:,:,2)*Color_QiPanBack(2);
M_QiPan(:,:,3)=M_QiPan(:,:,3)*Color_QiPanBack(3);
%画棋盘线
for i=xcol_ChessLine
  M_QiPan(i,Wid_edge+1:NumSum-Wid_edge,:)=ones(NumSum-2*Wid_edge,1)*Color_ChessLine;
end
for j=yrow_ChessLine
  M_QiPan(Wid_edge+1:NumSum-Wid_edge,j,:)=ones(NumSum-2*Wid_edge,1)*Color_ChessLine;
end
%画9个小圆点
radius_Dot=5;
P1=Wid_edge+1+Dpixel*3:Dpixel*(NumCell/2-3):Wid_edge+1+Dpixel*(NumCell-3);
for ti=P1
  for tj=P1
    for Num=ti-radius_Dot:ti+radius_Dot;
      for j=tj-radius_Dot:tj+radius_Dot;
        if (Num-ti)^2+(j-tj)^2<radius_Dot^2
          M_QiPan(Num,j,:)=Color_ChessLine;
        end
      end
    end
  end
end
end

3、下棋或悔棋函数

%Author:LeiZhen
%Date:2018-03-12
function M_QiPan=Chess(M_QiPan,x_col_Chess,y_row_Chess,radius_Chess,BorW,Wid_edge,Dpixel,Color_QiPanBack,Color_ChessLine)
%此程序下棋或者悔棋
%M_QiPan为棋盘矩阵
%xcol_ChessLine为棋盘列线
%yrow_ChessLine为棋盘行线
%radius_Chess为棋的像素半径
%BorW为下棋选择，1黑棋，2白棋，3悔棋
%Wid_edge为棋盘矩阵中的棋盘边缘的像素宽度
%Dpixel为棋盘矩阵中的相邻棋盘线间的像素间隔
%Color_QiPanBack为棋盘背景颜色
%Color_ChessLine为棋盘线的颜色
Color_BChess=[54,54,54];
Color_WChess=[255,240,245];
[Wid,Hei,Deep]=size(M_QiPan);
for i=x_col_Chess-radius_Chess:x_col_Chess+radius_Chess
  for j=y_row_Chess-radius_Chess:y_row_Chess+radius_Chess
    if (i-x_col_Chess)^2+(j-y_row_Chess)^2<=radius_Chess^2
      if BorW==1%黑棋
        M_QiPan(j,i,:)=Color_BChess;
      elseif BorW==2%白棋
        M_QiPan(j,i,:)=Color_WChess;
      elseif BorW==3%悔棋
        M_QiPan(j,i,:)=Color_QiPanBack;
        %对于不是棋盘边缘的棋子
        if i==x_col_Chess||j==y_row_Chess
          M_QiPan(j,i,:)=Color_ChessLine;
        end
        %悔棋点是否为小圆点
        if ((i-x_col_Chess)^2+(j-y_row_Chess)^2<5^2)&&...
          (x_col_Chess==Wid_edge+1+Dpixel*3||x_col_Chess==floor(Wid/2)+1||x_col_Chess==Wid-Wid_edge-Dpixel*3)&&...
          (y_row_Chess==Wid_edge+1+Dpixel*3||y_row_Chess==floor(Wid/2)+1||y_row_Chess==Wid-Wid_edge-Dpixel*3)      
          M_QiPan(j,i,:)=Color_ChessLine;
        end
        %对于棋盘边缘的棋子
        if x_col_Chess==Wid_edge+1&&i<x_col_Chess
          M_QiPan(j,i,:)=Color_QiPanBack;
        elseif x_col_Chess==Wid-Wid_edge&&i>x_col_Chess
          M_QiPan(j,i,:)=Color_QiPanBack;
        end
        if y_row_Chess==Wid_edge+1&&j<y_row_Chess
          M_QiPan(j,i,:)=Color_QiPanBack;
        elseif y_row_Chess==Wid-Wid_edge&&j>y_row_Chess
          M_QiPan(j,i,:)=Color_QiPanBack;
        end
      end
    end
  end
end
end

4、胜负判断函数

%Author:LeiZhen
%Date:2018-03-12
function Victory_flag=Victory_Judge(M_LuoZi,x_col_LuoZi,y_row_LuoZi,State)
%对一方是否获胜的判断函数
%M_LuoZi为下棋点的矩阵
%x_col_LuoZi为下棋列数
%y_row_LuoZi下棋行数
%State为M_LuoZi矩阵某点的下棋状态，黑棋（1）或白棋（2）或无棋（0）,以及每步棋的序号
%NumCell为棋盘格数
%Victory_flag为胜利标志
NumCell=length(M_LuoZi)-1;
Victory_flag=0;
for i=1:NumCell-3
  if M_LuoZi(i,y_row_LuoZi,1)==State&&M_LuoZi(i+1,y_row_LuoZi,1)==State&&M_LuoZi(i+2,y_row_LuoZi,1)==State&&M_LuoZi(i+3,y_row_LuoZi,1)==State&&M_LuoZi(i+4,y_row_LuoZi,1)==State
    Victory_flag=1;
    break;
  end
  if M_LuoZi(x_col_LuoZi,i,1)==State&&M_LuoZi(x_col_LuoZi,i+1,1)==State&&M_LuoZi(x_col_LuoZi,i+2,1)==State&&M_LuoZi(x_col_LuoZi,i+3,1)==State&&M_LuoZi(x_col_LuoZi,i+4,1)==State
    Victory_flag=1;
    break;
  end
  if abs(x_col_LuoZi-y_row_LuoZi)+i<=NumCell-3
    if x_col_LuoZi>=y_row_LuoZi
      if M_LuoZi(abs(x_col_LuoZi-y_row_LuoZi)+i,i,1)==State&&M_LuoZi(abs(x_col_LuoZi-y_row_LuoZi)+i+1,i+1,1)==State&&M_LuoZi(abs(x_col_LuoZi-y_row_LuoZi)+i+2,i+2,1)==State&&M_LuoZi(abs(x_col_LuoZi-y_row_LuoZi)+i+3,i+3,1)==State&&M_LuoZi(abs(x_col_LuoZi-y_row_LuoZi)+i+4,i+4,1)==State
        Victory_flag=1;
        break;
      end
    elseif x_col_LuoZi<y_row_LuoZi
      if M_LuoZi(i,abs(x_col_LuoZi-y_row_LuoZi)+i,1)==State&&M_LuoZi(i+1,abs(x_col_LuoZi-y_row_LuoZi)+i+1,1)==State&&M_LuoZi(i+2,abs(x_col_LuoZi-y_row_LuoZi)+i+2,1)==State&&M_LuoZi(i+3,abs(x_col_LuoZi-y_row_LuoZi)+i+3,1)==State&&M_LuoZi(i+4,abs(x_col_LuoZi-y_row_LuoZi)+i+4,1)==State
        Victory_flag=1;
        break;
      end
    end
  end
  if y_row_LuoZi+x_col_LuoZi<=NumCell+2&&y_row_LuoZi+x_col_LuoZi-i>=5
    if M_LuoZi(y_row_LuoZi+x_col_LuoZi-i,i,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-i-1,i+1,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-i-2,i+2,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-i-3,i+3,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-i-4,i+4,1)==State
      Victory_flag=1;
      break;
    end
  elseif y_row_LuoZi+x_col_LuoZi>NumCell+2&&y_row_LuoZi+x_col_LuoZi+i<=NumCell*2-1
    offset=NumCell+2;
    if M_LuoZi(y_row_LuoZi+x_col_LuoZi-offset+i,offset-i,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-offset+i+1,offset-i-1,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-offset+i+2,offset-i-2,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-offset+i+3,offset-i-3,1)==State&&M_LuoZi(y_row_LuoZi+x_col_LuoZi-offset+i+4,offset-i-4,1)==State
      Victory_flag=1;
      break;
    end
  end
end
end

5、光标函数（由库函数改动而来）

%此函数为库函数的修改，仅将十字光标改为箭头光标，改动位置为第88行
function [out1,out2,out3] = ginput_pointer(arg1)
%GINPUT Graphical input from mouse.
%  [X,Y] = GINPUT(N) gets N points from the current axes and returns
%  the X- and Y-coordinates in length N vectors X and Y. The cursor
%  can be positioned using a mouse. Data points are entered by pressing
%  a mouse button or any key on the keyboard except carriage return,
%  which terminates the input before N points are entered.
%
%  [X,Y] = GINPUT gathers an unlimited number of points until the
%  return key is pressed.
%
%  [X,Y,BUTTON] = GINPUT(N) returns a third result, BUTTON, that
%  contains a vector of integers specifying which mouse button was
%  used (1,2,3 from left) or ASCII numbers if a key on the keyboard
%  was used.
%
%  Examples:
%    [x,y] = ginput;
%
%    [x,y] = ginput(5);
%
%    [x, y, button] = ginput(1);
%
%  See also GTEXT, WAITFORBUTTONPRESS.
 
%  Copyright 1984-2011 The MathWorks, Inc.
%  $Revision: 5.32.4.18 $ $Date: 2011/05/17 02:35:09 $
 
out1 = []; out2 = []; out3 = []; y = [];
c = computer;
if ~strcmp(c(1:2),'PC')
  tp = get(0,'TerminalProtocol');
else
  tp = 'micro';
end
 
if ~strcmp(tp,'none') && ~strcmp(tp,'x') && ~strcmp(tp,'micro'),
  if nargout == 1,
    if nargin == 1,
      out1 = trmginput(arg1);
    else
      out1 = trmginput;
    end
  elseif nargout == 2 || nargout == 0,
    if nargin == 1,
      [out1,out2] = trmginput(arg1);
    else
      [out1,out2] = trmginput;
    end
    if nargout == 0
      out1 = [ out1 out2 ];
    end
  elseif nargout == 3,
    if nargin == 1,
      [out1,out2,out3] = trmginput(arg1);
    else
      [out1,out2,out3] = trmginput;
    end
  end
else
  
  fig = gcf;
  figure(gcf);
  
  if nargin == 0
    how_many = -1;
    b = [];
  else
    how_many = arg1;
    b = [];
    if ischar(how_many) ...
        || size(how_many,1) ~= 1 || size(how_many,2) ~= 1 ...
        || ~(fix(how_many) == how_many) ...
        || how_many < 0
      error(message('MATLAB:ginput:NeedPositiveInt'))
    end
    if how_many == 0
      % If input argument is equal to zero points,
      % give a warning and return empty for the outputs.
      
      warning (message('MATLAB:ginput:InputArgumentZero'));
    end
  end
  
  % Setup the figure to disable interactive modes and activate pointers. 
  initialState = setupFcn(fig);
  set(gcf, 'pointer', 'arrow');
  
  % onCleanup object to restore everything to original state in event of
  % completion, closing of figure errors or ctrl+c. 
  c = onCleanup(@() restoreFcn(initialState));
    
  
  % We need to pump the event queue on unix
  % before calling WAITFORBUTTONPRESS
  drawnow
  char = 0;
  
  while how_many ~= 0
    % Use no-side effect WAITFORBUTTONPRESS
    waserr = 0;
    try
      keydown = wfbp;
    catch %#ok<CTCH>
      waserr = 1;
    end
    if(waserr == 1)
      if(ishghandle(fig))
        cleanup(c);
        error(message('MATLAB:ginput:Interrupted'));
      else
        cleanup(c);
        error(message('MATLAB:ginput:FigureDeletionPause'));
      end
    end
    % g467403 - ginput failed to discern clicks/keypresses on the figure it was
    % registered to operate on and any other open figures whose handle
    % visibility were set to off
    figchildren = allchild(0);
    if ~isempty(figchildren)
      ptr_fig = figchildren(1);
    else
      error(message('MATLAB:ginput:FigureUnavailable'));
    end
    %     old code -> ptr_fig = get(0,'CurrentFigure'); Fails when the
    %     clicked figure has handlevisibility set to callback
    if(ptr_fig == fig)
      if keydown
        char = get(fig, 'CurrentCharacter');
        button = abs(get(fig, 'CurrentCharacter'));
      else
        button = get(fig, 'SelectionType');
        if strcmp(button,'open')
          button = 1;
        elseif strcmp(button,'normal')
          button = 1;
        elseif strcmp(button,'extend')
          button = 2;
        elseif strcmp(button,'alt')
          button = 3;
        else
          error(message('MATLAB:ginput:InvalidSelection'))
        end
      end
      axes_handle = gca;
      drawnow;
      pt = get(axes_handle, 'CurrentPoint');
      
      how_many = how_many - 1;
      
      if(char == 13) % & how_many ~= 0)
        % if the return key was pressed, char will == 13,
        % and that's our signal to break out of here whether
        % or not we have collected all the requested data
        % points.
        % If this was an early breakout, don't include
        % the <Return> key info in the return arrays.
        % We will no longer count it if it's the last input.
        break;
      end
      
      out1 = [out1;pt(1,1)]; %#ok<AGROW>
      y = [y;pt(1,2)]; %#ok<AGROW>
      b = [b;button]; %#ok<AGROW>
    end
  end
  
  % Cleanup and Restore 
  cleanup(c);
  
  if nargout > 1
    out2 = y;
    if nargout > 2
      out3 = b;
    end
  else
    out1 = [out1 y];
  end
  
end
end
 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function key = wfbp
%WFBP  Replacement for WAITFORBUTTONPRESS that has no side effects.
 
fig = gcf;
current_char = []; %#ok<NASGU>
 
% Now wait for that buttonpress, and check for error conditions
waserr = 0;
try
  h=findall(fig,'Type','uimenu','Accelerator','C');  % Disabling ^C for edit menu so the only ^C is for
  set(h,'Accelerator','');              % interrupting the function.
  keydown = waitforbuttonpress;
  current_char = double(get(fig,'CurrentCharacter')); % Capturing the character.
  if~isempty(current_char) && (keydown == 1)     % If the character was generated by the
    if(current_char == 3)              % current keypress AND is ^C, set 'waserr'to 1
      waserr = 1;                 % so that it errors out.
    end
  end
  
  set(h,'Accelerator','C');              % Set back the accelerator for edit menu.
catch %#ok<CTCH>
  waserr = 1;
end
drawnow;
if(waserr == 1)
  set(h,'Accelerator','C');             % Set back the accelerator if it errored out.
  error(message('MATLAB:ginput:Interrupted'));
end
if nargout>0, key = keydown; end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
end
function initialState = setupFcn(fig)
% Store Figure Handle. 
initialState.figureHandle = fig; 
% Suspend figure functions
initialState.uisuspendState = uisuspend(fig);
% Disable Plottools Buttons
initialState.toolbar = findobj(allchild(fig),'flat','Type','uitoolbar');
if ~isempty(initialState.toolbar)
  initialState.ptButtons = [uigettool(initialState.toolbar,'Plottools.PlottoolsOff'), ...
    uigettool(initialState.toolbar,'Plottools.PlottoolsOn')];
  initialState.ptState = get (initialState.ptButtons,'Enable');
  set (initialState.ptButtons,'Enable','off');
end
% Setup FullCrosshair Pointer without warning. 
oldwarnstate = warning('off', 'MATLAB:hg:Figure:Pointer');
set(fig,'Pointer','fullcrosshair');
warning(oldwarnstate);
% Adding this to enable automatic updating of currentpoint on the figure 
set(fig,'WindowButtonMotionFcn',@(o,e) dummy());
% Get the initial Figure Units
initialState.fig_units = get(fig,'Units');
end
function restoreFcn(initialState)
if ishghandle(initialState.figureHandle)
  % Figure Units
  set(initialState.figureHandle,'Units',initialState.fig_units);
  set(initialState.figureHandle,'WindowButtonMotionFcn','');
  
  % Plottools Icons
  if ~isempty(initialState.toolbar) && ~isempty(initialState.ptButtons)
    set (initialState.ptButtons(1),'Enable',initialState.ptState{1});
    set (initialState.ptButtons(2),'Enable',initialState.ptState{2});
  end
  
  % UISUSPEND
  uirestore(initialState.uisuspendState);
end
end
function dummy()
% do nothing, this is there to update the GINPUT WindowButtonMotionFcn. 
end
function cleanup(c)
if isvalid(c)
  delete(c);
end
end

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持猪先飞。